Dig a ditch or use a trenchless sewer repair?

When you have problems in your sewer line, you have two options to fix it: Dig a ditch around the sewer pipe or use trenchless sewer line repairs. A trenchless sewer repair is a time and cost-effective while claiming little to no digging.

To start the process, technicians use a tape camera to enter the sewer line and recommend repairs. Either one of two plumbing repairs is normally recommended:

Pipelining — If the damage to your sewage pipe is lowest, pipe buffer can be used to fit an inflatable tube covered in paste into your sewer line. From there, the tube is inflated, pressing against the living line. While it’s up against the living sewage line, the cement cures and hardens, repairing the leak. The inflatable tube can either be removed and the sewer line repaired.

Pipe bursting — When a sewer line is too damaged to use the pipelining strategy, a more invasive trenchless repair can be performed. Technicians feed a cone-shaped bit through your extant line and destroy the pipe while incontinently replacing it with a new one. This process is more premium and minor time-effective, but it doesn’t need rangy excavation.

Even so, you may have to resort to traditional stitcher line replacement ways, if your pipes are damaged beyond the trim. This is an extremely invasive and valuable way that requires technicians to dig up your yard to reveal the damaged or broken lines. However, excavation is necessary if your home’s sewage system has widespread damage.

CAUSES OF SEWER LINE DAMAGE

From stuffed pipes to normal wear and slit, presently are some causes of sewer line damage.

Tree Roots

One of the most common causes of sewer line damage is tree roots. A tree’s roots follow sources of water as they grow. Since sewer lines carry liquid waste, roots are naturally attracted to the source — particularly when there's before a small leak in the drain.

Once in contact with a sewer pipe, tree roots begin to wrap around and break into pipes, blocking, weakening, and yea breaking the structure. Character sewer pipes, normally constitute in aging homes, are the most susceptible to damage from tree roots.

Corroded pipes

Although pipes made of the blade and cast iron are galvanized to avert rusting, these pipes are at a high danger of biting due to calcium and magnesium constitution-up from regular wear and tear. However, it can leave the pipe susceptible to leaks and cracks if attrition is left crude.

HOW TO PROTECT YOUR SEWER LINES

Although not all sewer line damage is preventable, presently are three pathways you can take to mind for your sewage system:

Enter sewer line look-sees once a time — To confirm that your sewage system is in good working condition, hire a professional to conduct a look-see at least once a time. Some plumbing companies offer a camera look-see so that the inside of your sewer pipe can be checked for erosion or blockages.

Remove trees that are damaging the sewer line — Although a root incursion in your sewer line is hourly caused by a before- breathing crack or leak in the pipe, we still recommend removing the tree from the area after repairing or replacing the pipe to guaranty the problem doesn’t arise again in the future.

Use your sewage system duly — Remember to only dispose of mortal waste and potty paper in the sewer lines; any other paraphernalia that enters the system can affect blockages.

Restore Pipe Systems is a professional plumbing company specialized in Trenchless Sewer Repair that attend in Logan, Utah!