Hydro Jetting Services in Utah
Powerful Water Pressure for a Deep, Lasting Clean!
Best Hydro Jetting Services in Utah
Slow drains. Recurring backups. That stubborn clog that just won’t quit, no matter how many times you’ve had it snaked. If this sounds familiar, you’re not alone. And honestly, snaking probably isn’t solving your problem. It’s just delaying it.
Restore Pipe’s hydro jetting services in Utah get to the root of the issue, literally. Using high-pressure water jetting technology that delivers anywhere from 100 PSI to over 5,000 PSI, we don’t just poke a hole through your clog. We blast the entire pipe wall clean. Grease, mineral scale, tree roots, sludge, gone.
If you’re searching for a reliable hydro jetting company near me, you’ve found it. We serve homeowners and businesses across Utah, Idaho, and Wyoming, and we’re ready to help you today.
Contact Us Today
Why Choose Restore Pipe For Hydro Jetting in Utah
There’s no shortage of plumbing companies in Utah. But there’s a big difference between a company that offers hydro jetting as an upsell and one that’s actually built around doing it right. Here’s why hundreds of Utah homeowners and businesses trust the Restore Pipe.
Industry-Leading Pressure & Flow Rates
Our equipment operates at pressures ranging from 100 PSI to more than 5,000 PSI and flushes water at anywhere between 1 gallon per minute to more than 18 gallons per minute. That range matters; it means we can safely treat a residential bathroom drain the same day we tackle a commercial sewer main. No two jobs are the same, and our setup reflects that.
Effective for Tough & Recurring Blockages
If your drain has been “fixed” two or three times and keeps backing up, that’s a sign the problem was never fully cleared. Hydro jetting or jet blasting, as it’s sometimes called, doesn’t just punch through a clog. It scrubs the interior pipe wall clean from edge to edge, removing the buildup that keeps coming back. For grease-heavy lines, root intrusion, or heavy mineral scale, it’s simply the most effective solution available.
Safe for Residential & Commercial Plumbing
Worried about your pipes? Don’t be, when done correctly, high-pressure washer cleaning is safe for most pipe materials including PVC, cast iron, ABS, and copper. Our licensed technicians assess your system before a single drop of water goes through the line. We calibrate pressure and flow to match your specific plumbing, so there’s no risk of unnecessary damage.
Advanced Diagnostic Integration
We don’t guess. Before we jet, we run a live sewer camera inspection so we know exactly what’s in your pipe, where it is, and how bad it is. After jetting, we run it again so you can see the results with your own eyes. This isn’t just good practice, it protects you from paying for work that wasn’t needed and helps catch any underlying issues before they get worse.
Licensed Technicians You Can Trust
Every hydro jetting job at Restore Pipe is performed by a licensed, trained plumber. We don’t sub out work or send out technicians who aren’t fully qualified. When we show up at your door, you’re getting a professional who knows what they’re doing and stands behind it.
Free Second Opinion
Another plumber told you that you need a full pipe replacement? Get a second opinion before you spend thousands. We’ll come out, assess the situation honestly, and tell you exactly what’s going on at no charge. We’d rather earn your trust than your money on work you didn’t need.
Top-Rated with 100+ Reviews
We’re not asking you to take our word for it. Restore Pipe has earned 100+ verified five-star reviews from real customers across Utah, Davis, Weber, Idaho, and Wyoming. Our reputation was built one honest job at a time, and we intend to keep it that way.
Our Hydro Jetting Process
We keep things simple, transparent, and efficient. Here’s exactly what happens when you call Restore Pipe for drain or sewer jetting:
Step 1: You Call, We Listen
Tell us what’s going on, slow drain, full backup, recurring issue, whatever it is. We’ll ask a few quick questions to understand your situation and get the right tech and equipment dispatched to your location.
Step 2: Camera Inspection First
Before any jetting begins, we insert a high-definition camera into your drain or sewer line. This tells us precisely where the blockage is, what it’s made of, and whether your pipes are in good enough condition to handle high-pressure water jetting safely. No surprises. No guessing.
Step 3: Pressure Calibration
Based on what the camera shows us, we set the PSI and GPM to match your specific pipe type and blockage. This step is what separates a professional hydro jetting company from someone just pointing a hose at your drain.
Step 4: Hydro Jetting
We feed our specialised nozzle into the line and let the water do its work. The forward-facing jets break through the blockage while rear-facing jets propel the nozzle forward and scour the pipe walls clean. Grease, roots, sediment, scale, all of it gets flushed out of the line completely.
Step 5: Post-Jetting Camera Verification
Once we’re done, we run the camera through again. You’ll see the before and after with your own eyes. If anything looks like it needs follow-up, a cracked pipe, significant root damage, we’ll walk you through your options clearly and honestly, including whether a service like trenchless pipe bursting makes more sense for your situation.
Hydro Jetting Cost in Utah
No two drain and sewer problems are the same. Hydro jetting rates vary based on the length of the pipe, type of blockage, type of pipe and how accessible your lines are.
What we promise is this: you’ll know how much the whole process is going to cost before we start. It’s honest, transparent and there’s no pressure.
The easiest way to get a price is to call us. We’ll ask you a few questions and in most cases we’ll be able to give you a rough estimate over the phone or arrange a same-day inspection of the line.
Here’s what typically affects your hydro jetting cost in Utah:
- Length and diameter of the pipe being jetted
- Severity and type of blockage (grease, roots, mineral scale)
- Whether a camera inspection is needed before or after
- Residential vs. commercial system
- Standard scheduling vs. emergency high-pressure response
Frequently Asked Questions
How often should I schedule hydro jetting for my home or business?
Generally, we suggest every 18 to 24 months for residential properties as a preventative measure, and more frequently if you’ve experienced a backup in the past, or if you have an older home with a buildup. For businesses, particularly restaurants that have a daily flow of grease into the drain, it’s usually sufficient to schedule every 6-12 months. The fact is, it’s much less expensive to jet blast now, than it will cost to have a full back up or an emergency high pressure call at 10pm on a Saturday.
Is hydro jetting safe for all types of pipes?
In most cases, yes, if performed by an experienced operator. PVC, ABS, cast iron and copper pipes in good condition can all withstand high pressure water jetting, as long as it’s done at the right pressure. The word to remember is “calibrated.” That’s why we first inspect with a camera. If we find that the pipe is substantially damaged, there are minor cracks or pits, or there is significant corrosion, we’ll let you know and recommend a different method of service, such as our trenchless pipe bursting service. We won’t jet a pipe that isn’t going to hold up to it.
How does hydro jetting differ from snaking?
Snaking (also known as rooter service) involves pulling or breaking a clog with a metal cable. This is effective for minor clogs, and is the first line of attack for a single slow drain. The downside is it only removes the clog. It doesn’t remove the build-up on the pipe walls, so the grease, limescale and other stuff is still there, and can quickly clog the pipe again. With hydro jetting, the entire inside wall of the pipe is cleaned. When it comes to difficult, persistent or extensive blockages, it’s the best. Read more here about the differences between high pressure water jetting and other methods
Restore Pipe- Serving entire Northern Utah including Bear Lake County, Box Elder County, Cache County, Davis County, Franklin County, Morgan County, Oneida County, Rich County, Weber County including locations in Idaho & Wyoming, such as Pocatello (Bannock County), Kemmerer (Lincoln County) & Evanston (Uinta County)
Free Estimates | Same-Day Service Available
Contact Us For A Quote Or A Free 2nd Opinion
Top-Rated, 100+
Reviews
Chat
Here's Why Our Clients Love Us!
Faster
Many of our jobs are done the same day! Get a FREE 2nd Opinion Now!
Cheaper
Since our digging is minimal, you don’t have the cost of replacing large amounts of landscaping or concrete, or of cleaning up the more extensive mess traditional pipe replacement can cause.
Cleaner
We are able to replace most pipe lines with no digging at all or with only 2 holes dug: one as an entrance pit and the other as the exit pit.
Award-Winning Service Excellence
Professional Memberships & Associations
Satisfied Customer Reviews
Top-Rated, 100+
Reviews
Services We Offer
Services We Offer
Contact Us For A Quote Or A Free 2nd Opinion
Top-Rated, 100+
Reviews
Promotional Deals & Offer
Frequently Asked Questions
What are the signs I might have a cracked or broken sewer line?
It doesn’t matter if you have broken pipe, corroded pipe, cracked pipe, rough pipe or tree root intrusion, we can fix the problem. We do this using proven, trenchless and no-dig technology.
Our trenchless pipe repair provides a strong, fast and less invasive alternative to traditional digging. Since we can replace lines up to hundreds of feet in a single day, we reduce service interruption and discomfort. We also reduce or eliminate the amount of yard, landscape, driveway, wall, or floor that has to be cleaned up or replaced.
